Communication Specialists | Call Us 919-832-9121
Communication Specialists | 919-832-9121

Comparing Products



Product Summary

  • 50 - 1 W RF Output Power (Up to 50 W @ 50%, 25 W @ 100% Duty Cycle)
  • 136 - 174 MHz
  • Light, Compact and Space-Efficient
  • 1.71-inch OLED with Icons and Numeric Displays
  • Thermal-Controlled Cooling Fan
  • External Power Supply
  • Up to 32 Channels
  • Dual Digital Protocol: DMR Tier II / NXDN Conventional*2, *3 (programmable one at a time)
  • USB-A Connector Ready for Audio Accessories
  • External In/Out Pin from DB25
  • Non-repeat Simplex / Semi-Duplex Mode for Analog and NXDN Digitall*2, *3
  • Hot Standby System Redundancy
  • Built-in IP Network Adapter
  • Unicast and Multicast Call Routing
  • SNMP Protocol for Direct Reporting to a Generic System*3
  • Supports G.711 Audio Codec (for Test onsole and Third-party Applications)
  • IP Remote Management (Monitor / Control / Programming / Test Console)
  • Ready for IPIF to External Applications (for IP Console, OTAP) / Voice Logging
  • Built-in SIP IF without External IP Console or Gateway (Digital Only)*1, *2, *3
  • IP Remote Control Interface (IPRCI)*3
  • Enhanced Security (HTTPS)
  • CW ID
  • Hang Timer
  • Multi-Site Conventional IP Network up to 16 Sites (for both Digital and Analog)*2
  • IP Networking Compatible with NXR-5000 (NXDN)*2,*3, legacy KTI-3 (NXDN)*2,*3 and KTI-5 (DMR)*2




Product Summary

The KCH-21R ia a speaker microphone with a full-featured control head, which enables one-hand operation of PTT, volume and channel selection. Designed to be used with the KENWOOD NEXEDGE® NX-5000 Series mobiles, the control head's large, bright 1.74" LCD display makes it easy to do at-a-glance status checks. The 14-character full-color display has 5 lines for customizable menus and icons and the 7-color LED display at the top of the unit can be used for quick visual alerts, even in low light and high noise environments. The KCH-21R has built-in Bluetooth® with HSP (headset) and SPP (serial port) profiles and a powerful built-in speaker with 1W output, supported by active noise reduction.

The KCH-21R was designed in collaboration with our fire service and police customers who asked us for easy, intuitive one-hand operation. Our public safety customers also wanted to be able to remotely control multiple NX-5000 Series RF decks, which many of our customers use in their vehicles to enable full tri-band receive and transmit.

FEATURE HIGHLIGHTS

  • Speaker microphone with full-featured control head
  • Handheld design offers one-handed operation of PTT, volume and channel selection
  • Designed to work with the NX-5000 Series mobile radios using Control Head Remote Kit
  • Intuitive operation similar to that of the KCH-19 and KCH-20R control heads

AUDIO FEATURES

  • Built-in speaker with 1 W output
  • Active noise reduction for a single microphone enabled by DSP on the radio
  • 3.5mm-diameter earphone jack on the bottom

DISPLAY FEATURES

  • Large 1.74-inch TFT/transflective LCD for at-a-glance operational status checking
  • Intuitive GUI - 14-character full-color display with 5 lines for menus and icons
  • 7-color programmable LED located at the top for easy recognition

OTHER FEATURES

  • Multi-head/Multi-deck Configuration
  • Built-in Bluetooth® with HSP (headset) and SPP (serial port) profiles
  • Data interface for radio programming, keyloading and data I/O
  • Optional adapter for the RF Deck (KRK-15BM Control Head Remote Kit) is required
  • for connection to the mobile radio

MULTIPLE REMOTE CONTROL HEAD CONFIGURATION

  • Intuitive graphical UI is used even for the selection of multiple RF decks.
  • Dual Remote Control Heads x Multi RF Decks
  • Dual Remote Control Heads x Single RF Deck




Product Summary

  • UHF 450-520 40-1W RF Output Power (up to 40W @ 50%, 25W @ 100% Duty Cycle)
  • Light, Compact and Space-Efficient
  • 1.71-inch OLED with Icons and Numeric Displays
  • Thermal-Controlled Cooling Fan
  • Up to 32 Channels
  • Selectable Digital Protocol: DMR Tier II / NXDN Conventional*2 (programmable one at a time)
  • USB-A Connector Ready for Audio Accessories
  • External In/Out Pin from DB25
  • External In/Out Pin from DB25
  • Non-repeat Simplex / Semi-Duplex Mode for Analog and NXDN Digitall*2, *3
  • Hot Standby System Redundancy
  • Built-in IP Network Adapter
  • Unicast and Multicast Call Routing
  • SNMP Protocol for Direct Reporting to a Generic System*3
  • Supports G.711 Audio Codec (for Test onsole and Third-party Applications)
  • IP Remote Management (Monitor / Control / Programming / Test Console)
  • IPIF to External Applications (for IP Console, OTAP)
  • IP Network Voice Logging Interface*3
  • Built-in SIP IF (Digital Only)*1, *2
  • IP Remote Control Interface (IPRCI)
  • Enhanced Security (HTTPS)
  • CW ID
  • Hang Timer
  • Multi-Site Conventional IP Network up to 16 Sites (for both Digital and Analog)*2
  • IP Networking Compatible with NXR-5000 (NXDN)*2,*3, legacy KTI-3 (NXDN)*2 and KTI-5 (DMR)*2




Product Summary

The KENWOOD Viking 8000 series Multi-Band, Multi-Protocol portable is specifically designed for today's public safety agencies with advanced features.

FEATURES

  • Multi-Band operation (VHF, UHF, 700/800 MHz)
  • Multi-Protocol
  • P25 Phase 1 & 2 Trunking
  • P25 Conventional
  • DMR*
  • Viking16 (SmartNet/SmartZone™ Compatible)
  • FM Analog
  • Mixed protocol zones (each channel in a zone can be from a different system)
  • 1024 channels (2048 & 4096 options)
  • Public safety ergonomics: flare grip for control, large glove friendly knobs, large emergency button
  • 3-Watt audio maximum output for high noise environments
  • Voice annunciation & custom announcement creation
  • Fully ruggedized - IP67/68 & MIL-STD-810 C/D/E/F/G/H
  • Full key models (with numeric keypad)
  • Built-in GPS receiver/antenna for enhanced awareness
  • MDC-1200 & GE-Star signaling
  • P25 Authentication
  • Bluetooth® / Bluetooth Low Energy
  • Wi-Fi® 2.4 & 5 GHz (802.11a/b/g/n/ac)
  • Man Down
  • Instant Recording Replay (IRR) and Voice Recording
  • Text Messaging
  • Radio Cloning
  • FIRESafe® Fire Ground Commander and First Responder
  • Encryption:
    • ARC4™ software encryption; compatible with Motorola ADP™
    • P25/TIA defined: AES-256
    • DES-OFB
    • Over-the-Air-Rekeying (OTAR)
*In future release



Product Summary

SOUND PERFORMANCE, SMOOTH OPERATION

Emulating the distinguished NX-3000 and NX-5000 series, the NX-1700H/1800H mobile radio supports multiple protocols including NXDN and DMR as well as mixed digital & FM analog operation. As it’s packed with all the features essential for numerous enterprise and operation-critical applications. It’s also equipped with optimizable TX/RX audio quality, and a customizable front panel that prioritizes simple convenience: operational status is clear at a glance from the white backlit LCD display and 7-color LED indicator.

Features:

  • “One Radio” with Multi-protocol Support:
  • Designed to operate under an NXDN or DMR digital, and FM analog protocols
  • Upgradable Digital/Analog mode by software option (no firmware upgrade required)
  • Easy visible, white backlit LCD display:
    Alphanumeric, 10-digit, 13-character frame (aliases and icons)
    7-color LED indicator used to display various radio status
  • Renowned KENWOOD Audio Quality: 6 W (max) loud audio and optimizable
  • TX/RX audio profile: Audio Equalizer, Auto Gain Control (TX/RX) and Microphone type settings
  • Max. 260 Channels per radio, 128 Zones per radio, and 250 Channels per zone
  • Various scan functions: Dual/Single Priority scan, Multi/Single Zone scan and more
  • Orange-colored Emergency button & Customizable
  • Emergency functions
  • Lone Worker
  • Remote Stun, Kill, Check
  • Dual Priority Scan
  • Max/Min Volume setting
  • Voice Announcement
  • Electronic Serial Number (ESN)
  • Display Customization
  • D-sub, 15-pin GPIO and audio connector
  • GPS connectivity
  • Horn Alert and Public Address
  • Ignition Sense
  • 3.5 mm audio jack for external speaker
  • IP54 and MIL-STD 810C/D/E/F/G/H


Kenwood Products